How to Change Equipment Assignments on a Fader Channel

Category: General Tech Questions

How to Change Equipment Assignments on a Fader Channel We ordered our console with 14 fader channels, even though we have approximately 20 signal sources in the studio. We did this for two reasons....

1,977

(36)

How Do I Change the Setup of the Console? (Updated July 2025)

Category: General Tech Questions

One of the exciting features of our Axia Fusion audio system is the ability to save “preset” choices of channels for various purposes. Our console has 16 channels, but we have more than 21 different ...

7,372

(68)

How to Use the Digital Recorder

Category: Studio C (Air)

HOW TO USE THE DIGITAL RECORDER In both studios there are digital recorders for your use in recording or playing back audio files.  These devices record to and playback from USB media as well ...

2,891

(28)

Turntable volume too low / out of balance / one channel is out

Category: Studio C (Air)

STUDIO C (AIR) A common problem with the WRUW turntables is that the turntable volume is too low in one channel, or the two channels are out of balance, or one channel is completely gone.   Her...

2,624

(66)

How do I fix the settings on the console? (updated July 2025)

Category: General Tech Questions

A lot of the settings on the Axia console can be adjusted "on the fly" by anyone who wants to be creative in doing their radio show.   Unfortunately, some people who make these changes forget to "rese...

2,109

(70)

The board / console is frozen. I can't use the board at all. It's locked up.

Category: General Tech Questions

If the console in either studio has frozen or locked up, proceed as follows: If the Studio C (air studio) console has frozen or locked up during your show, do NOT file a Helpdesk ticket.  CALL t...

1,721

(64)